Blue Microphones 200 Manuale Utente
directly against the source. For a more natural sound, simply pull the source back from the microphone 2-4 inches.
For more tips on microphones and recording, be sure to visit www.bluemic.com.
For more tips on microphones and recording, be sure to visit www.bluemic.com.
care instructions
The en•CORE 200’s metal plated finishes will provide years of service and good looks if properly cared for.
To clean your en•CORE 200, simply wipe down with a damp cloth. Use of harsh cleaners or abrasives may cause
damage to your en•CORE’s surface finish.
To clean your en•CORE 200, simply wipe down with a damp cloth. Use of harsh cleaners or abrasives may cause
damage to your en•CORE’s surface finish.
The en•CORE 200 was designed for the rigors of daily use, and will stand up to demanding live performance or
recording environments. We know performances can get pretty intense out there, but try to avoid excessive physical
abuse or moisture exposure to the microphone — failure to do so could impact sound quality or reliability of your
en•CORE microphone.
recording environments. We know performances can get pretty intense out there, but try to avoid excessive physical
abuse or moisture exposure to the microphone — failure to do so could impact sound quality or reliability of your
en•CORE microphone.
Transducer
Polar Pattern
Frequency Response
Maximum SPL
Output Impedance
Sensitivity
Dimensions—Length
Dimensions—Diameter
Weight
tech specs
Dynamic Moving Coil
Cardioid
50Hz — 16kHz
147 dB SPL
25 ohms
2.25 mV/Pa
185mm/7.3in
28mm(50mm Max)/1.10in (1.97in max)
0.88 lbs/0.4 kG
Cardioid
50Hz — 16kHz
147 dB SPL
25 ohms
2.25 mV/Pa
185mm/7.3in
28mm(50mm Max)/1.10in (1.97in max)
0.88 lbs/0.4 kG
4