Stanton SA-12 Manuale Utente

D J   C R A Z E   S I G N A T U R E   M I X E R

STANTON MAGNETICS, INC

info@stantonmagnetics.com • (954) 689-8833

w w w . s t a n t o n m a g n e t i c s . c o m  

OWNER’S MANUAL

© 2001, Stanton Magnetics, LLC

This unit has been designed and man -
ufactured using quality components.

Therefore, it is warranted to be free
from defects in materials (limited as

specified below), and workmanship for
a period of twelve (12) months from the
original purchase date. During this

period, all service and parts necessary
to repair a defect will be free of charge.

This limited warranty applies to
mechanical parts which are subject to
wear and tear as specified: Faders,

specified durability: 15,000 cycles;
Rotary potentiometers, specified dura -

bility: 10,000 cycles; Switches, speci -
fied durability: 10,000 cycles.

Consequently, the parts listed above
are warranted to be free from defects in

materials and workmanship for a peri-
od of thirty days (30) days from the

original purchase date.

For the warranty to be valid, please

complete the warranty registration card
attached or fill out the online registra -

tion
at www.stantonmagnetics.com

Mail completed warranty cards to:

Stanton Magnetics, Inc,  3000 SW 42st
• Hollywood, FL 33312

WARRANTY

ROTATING AND REPLACING THE OS2

ROTATING INSTRUCTIONS

1 . Remove the face plate.

2. Remove the 2 outer screws from the

round OS2 plate (removing the 2 inner

screws will detach the fader from the
plate)

3. Rotate the plate to the desired posi -

tion and tighten the screws back into

the top and bottom holes.

REPLACING INSTRUCTIONS

1. Remove the the face plate.

2. Remove the 2 outer screws from the

round plate (removing the 2 inner

screws will detach the fader from the
plate) 

3. Remove the OS2 assembly and dis -

connect the cable coming from the

mixer.

4. Set the replacement fader assembly

in the desired position and place  the
screws back in the top and bottom

holes.