American Audio DX4 Manuale Utente
Introduction:
Congratulations and thank you for purchasing the American Audio
Congratulations and thank you for purchasing the American Audio
®
DX4™ professional audio pre-
amp/mixer. This mixer is a representation of American Audio’s continuing commitment to produce
the best and highest quality audio products possible at an affordable price. The DX4 mixer is a four
channel mixer and includes and assignable crossfader, a four band EQ, two mic inputs and other fea-
tures normally only included in expensive mixers. Please read and understand this manual completely
before attempting to operate your new mixer. This booklet contains important information concerning
the proper and safe operation of your new mixer.
Customer Support:
American Audio
the best and highest quality audio products possible at an affordable price. The DX4 mixer is a four
channel mixer and includes and assignable crossfader, a four band EQ, two mic inputs and other fea-
tures normally only included in expensive mixers. Please read and understand this manual completely
before attempting to operate your new mixer. This booklet contains important information concerning
the proper and safe operation of your new mixer.
Customer Support:
American Audio
®
provides a toll free customer support line, to provide set up help and to answer any
question should you encounter problems during your initial set up or operation of this unit. You may
also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are
Monday through Friday 9:00 a.m. to 5:30 p.m. Pacifi c Standard Time.
also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are
Monday through Friday 9:00 a.m. to 5:30 p.m. Pacifi c Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your mixer may require service,
please contact American Audio
doing so will void your manufactures warranty. In the unlikely event your mixer may require service,
please contact American Audio
®
customer support.
Please do not discard the packing carton in the trash. Please recycle when ever possible.
DX4™
Introduction
DX4™
Unpacking
Every DX4™ has been thoroughly tested and has been shipped in perfect operating condition. Care-
fully check the shipping carton for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your mixer for any damage that may have occurred during
shipping and be sure all accessories necessary to operate the unit have arrived intact. In the event
damage has been found or parts are missing, please contact our toll free customer support number for
further instructions, please do not return the mixer to your dealer without contacting customer support
fi rst.
fully check the shipping carton for damage that may have occurred during shipping. If the carton
appears to be damaged, carefully inspect your mixer for any damage that may have occurred during
shipping and be sure all accessories necessary to operate the unit have arrived intact. In the event
damage has been found or parts are missing, please contact our toll free customer support number for
further instructions, please do not return the mixer to your dealer without contacting customer support
fi rst.
©
American Audio
®
- www.americandj.com - DX4™ Instruction Manual Page 2
Please be sure to make all connections before you plug the mixer in. Be sure the power switch is in
the “OFF” position before connecting other devices to the mixer. All fader and volume controls should
be set to 0 or minimum position, before the device is switched on. If the device has been exposed to
drastic temperature fl uctuation (e.g. after transportation), do not switch on the mixer immediately. The
arising condensation of water might damage your device. Leave the device switched off until it has
reached room temperature.
Operating Determinations:
• When installing this mixer, please make sure that the device is not exposed to extreme heat,
the “OFF” position before connecting other devices to the mixer. All fader and volume controls should
be set to 0 or minimum position, before the device is switched on. If the device has been exposed to
drastic temperature fl uctuation (e.g. after transportation), do not switch on the mixer immediately. The
arising condensation of water might damage your device. Leave the device switched off until it has
reached room temperature.
Operating Determinations:
• When installing this mixer, please make sure that the device is not exposed to extreme heat,
moisture or dust!
• There should not be any cables lying around. Doing so endangers you as well as others.
• Do not operate the mixer in extremely hot (more than 30° / 100°F) or extremely cold (less than
• Do not operate the mixer in extremely hot (more than 30° / 100°F) or extremely cold (less than
5°C/40°F) surroundings.
• Keep the unit out of direct sunlight and away from heaters.
• Operate the mixer only after becoming familiar with its functions. Do not permit operation by per-
• Operate the mixer only after becoming familiar with its functions. Do not permit operation by per-
sons not qualifi ed for operating the mixer. Most damages are the result of unprofessional opera-
tion!
tion!
DX4™
Set-Up Precautions