Panasonic SX-KN7000 Manuale Utente
Simple recording method
With EASY COMPOSER you can easily create a unique rhythm pattern by selecting a different style for
each part of the rhythm.
each part of the rhythm.
1.
On the COMPOSER MENU display, select
EASY COMPOSER.
EASY COMPOSER.
• The display looks similar to the following.
2.
Use the MEM
∧
and
∨
buttons to select the
memory in which to record your rhythm.
• Select from A-vari 1 to 4, B-vari 1 to 4 and
C-vari 1 to 4.
3.
Use the PART
▲ and ▼ buttons to select the
part.
• In the EASY COMPOSER, the new rhythm
pattern is divided into 9 parts, to each of which
a style and variation is assigned.
a style and variation is assigned.
4.
Use the STYLE
∧
and
∨
buttons to select a
style.
5.
Use the VARI
∧
and
∨
buttons to select the
variation number.
• The number of variations differs depending on
the selected style.
• A part which is set to OFF does not sound.
Note that the “BsDrum&Snare” part cannot be
set to OFF.
set to OFF.
6.
Repeat steps 3 to 5 to select styles for the
other parts.
other parts.
7.
Press the SET button.
• The rhythm pattern is played back.
• If you are not satisfied with the rhythm pattern,
repeat steps 3 to 7.
• If you wish to correct the sounds or phrases
in your rhythm pattern, press the EDIT button.
The display changes to the recording display.
(Refer to page 112.)
The display changes to the recording display.
(Refer to page 112.)
• For playback, refer to page 115.
Create a completely new rhythm
Clear the memories and compose a completely new rhythm from scratch.
• You can also use this method when copying a pattern from a preset rhythm or the SEQUENCER.
• You can also use this method when copying a pattern from a preset rhythm or the SEQUENCER.
Prepare to record
1.
On the COMPOSER MENU display, select a
memory in which to record (RECORDING
MEMORY A, B, or C).
memory in which to record (RECORDING
MEMORY A, B, or C).
• The display looks similar to the following.
2.
Use the buttons below the display to select
the pattern you want to create.
the pattern you want to create.
• If the MEMORY CLR button is pressed, all the
current contents of the MEMORY are erased
(a confirmation display appears).
(a confirmation display appears).
• If the DSP SET button is pressed, the display
changes to the ACCOMP DSP setting display.
(Refer to page 115.)
(Refer to page 115.)
• You can press the NAMING button and assign
a name to the MEMORY.
Co
m
p
o
s
e
r
Part V
Composer
110
QQTG0671