Roland VS-1680 Manuale Utente

Enhancements to the display and specifications

3. Press [F4 (Exec)]. Alternatively, press [PAGE] so that [F4] 

indicates “Exec,” and then press [F4 (Exec)].

fig.7-09

4. Press [F4 (Exec)] once again.

5. A message will ask for confirmation. Press [YES]. The 

mastering template will be recalled. To cancel, press 

[NO].

fig.7-10

At this time, the main settings will be as follows.

:Master out

:Playback

:Off

:Mastering tool kit (insert)

6. You are returned to Play condition.

If you wish to modify the mastering template, refer to 

“Storing Routings as a Single List (Template)” (VS-1680 

Owner’s Manual, p. 41).

Changes you make to Easy Routing settings by step-editing 

(recording, mixdown, bouncing) will now be applied 

immediately to the actual routing.

For example if you raise or lower the level of a channel by 

step editing, the volume will now change accordingly. The 

same is true for pan, output destination, effects or AUX 

levels. This lets you hear the actual result while you set the 

routing.

Previously, you were asked “Apply this Routing?” when you 

had completed your routing settings, and the routing 

settings you made were actually applied only when you then 

pressed [YES].

Monitor level (the location of the MONITOR knob) is no 

longer stored in a scene. Even when you recall a stored scene, 

the monitor level will be determined by the current position 

of the MONITOR knob.

fig.7-11

→

The Master Send switch display has been changed from 

“Pan” to “MIX.” When reading the previous Owner’s 

Manual (including Quick Start and Appendices), please read 

any reference to [F1 (Pan)] as [F1 (MIX)].

fig.7-12