Roland PCR-80 Manuale Utente
115
Connection and MIDI data flow
When using a USB connection
fig.connect-usb
* If V-LINK is ON, PCR 1 and PCR 2 messages will be sent both to USB and to the MIDI connector.
* For an explanation of the items in the diagram, refer to
USB cable
AC adaptor
Roland
DP-2 (sold separately)
It is not necessary to connect the
AC adaptor if you are using a USB
connection. However, with some
computers, the PCR-30/50 may
not operate when powered from
the USB bus. In this case, set the
power switch to the DC position
and connect the AC adaptor.
AC adaptor if you are using a USB
connection. However, with some
computers, the PCR-30/50 may
not operate when powered from
the USB bus. In this case, set the
power switch to the DC position
and connect the AC adaptor.
EV-5 (sold separately)
PCR-30/50/80
PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
MIDI OUT
MIDI IN
MIDI OUT
MIDI IN
PCR-30/50/80
PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
PORT 1
EDIROL PCR MIDI IN
V-LINK OFF
V-LINK ON
PORT 1
PORT 2 /
PORT 2 /
MIDI OUT DEVICE
MIDI IN DEVICE
BULK
RECEPTION
RECEPTION
MIDI OUT DEVICE
MIDI IN DEVICE
BULK RECEPTION
BULK TRANSMISSION
BULK TRANSMISSION