Roland AT20s Manuale Utente
29
Selecting and Playing Sounds
■
Changing the Drum/SFX Set
Immediately after the power is turned on, the STANDARD drum set will sound.
Let’s try selecting a different Drum Set or the Sound Effect set.
As the drum set, you can choose from 8 types of drum set and one type of sound effect.
When you change the drum set, the sound produced by each note will change.
Let’s try selecting a different Drum Set or the Sound Effect set.
As the drum set, you can choose from 8 types of drum set and one type of sound effect.
When you change the drum set, the sound produced by each note will change.
fig.02-19
1.
Press the [Drums/SFX] button (indicator lights).
2.
When the Drum Set name is displayed on the screen, press the
Value [-] [+] buttons to select a Drum Set or Sound Effect Set.
Value [-] [+] buttons to select a Drum Set or Sound Effect Set.
The [Drums/SFX] button indicator will begin to blink.
fig.02-20
You can select from 8 different Drum Sets and one set of Sound Effects as follows:
STANDARD, ROOM, POWER, ELECTRONIC, TR-808, JAZZ, BRUSH, ORCHESTRA,
SOUND EFFECTS
3.
Press the [Drums/SFX] button once again.
The [Drums/SFX] button indicator will be lit constantly, and the selected Drum/SFX set
will be applied.
will be applied.
To stop mid-way through this or any procedure, press the [Display/Exit] button.
The Drum Set Type can also be selected from the Utility menu. Please refer to “Drums/SFX
Set” (p. 93).
Set” (p. 93).
1, 3
2
Drums/SFX
Lower
Display / Exit
Part
Menu
Value
Utility
AT-20S.e.book 29 ページ ２００３年１１月１０日 月曜日 午後２時３７分