Roland AT20s Manuale Utente

Using the Registration Buttons

Saving Registration Sets to a Floppy Disk

With the settings of Registration [1]–[4] buttons considered as one set, a single floppy
disk can store up to 99 sets of data. We recommend that complex panel settings or Reg-
istrations you wish to keep be saved on disk. If AT-20S Registrations that you create are
saved on a floppy disk, they can then be recalled later or recalled for use on another AT-
20S.

Make sure that the disk drive contains a disk that was formatted by
the AT-20S.

Press the [Registration] button (indicator lights).

Press the Select [-] and [+] buttons to select the number that you
wish to save to.

Numbers which have not been used in the Saving operation will be displayed as “- - -”.

fig.07-10

To cancel the operation, press the [Registration] button.

Press the [Save] button.

Press the [Bwd] or [Fwd] button to select the format in which the
data will be saved.

Press the [Save] button to execute the save operation.

When the Registration set is saved to the floppy disk, the indication of “- - -” will change
to “USE.”

fig.07-11

When saving is completed, the basic screen reappears.
If you have assigned a name, the Registration set will be saved to floppy disk with that
name.

●

If the following screen appears

If you press the [Save] button for a Registration number with the word “USE” indicated,
the following message appears.

fig.07-12

❍

If you wish to update the contents of the Registration deta

Press the [Rec] button.

The Registration will be rewritten.

AT-20S.e.book 54 ページ２００３年１１月１０日　月曜日　午後２時３７分