Roland AT20s Manuale Utente
78
Record and Playback Your Performance
❍
Changing the Number of Measures for Loop Recording
With the initial settings, Loop Recording will occur over one measure. In the Function
menu you can change the number of measures over which Loop Recording will occur.
menu you can change the number of measures over which Loop Recording will occur.
1.
Press the [Function] button.
2.
Press the Select [-] and [+] buttons to select “Loop Recording.”
fig.08-36
3.
Press the [Bwd] button and [Fwd] button to select the number of
measures for Loop Recording.
measures for Loop Recording.
4.
Press the [Function] or [Display/Exit] button.
The number of measures for Loop Recording has now been specified.
Use the procedure for Loop Recording to begin recording.
Using Song with a Different Tempo Than That of
the Performance Song
1.
Insert the floppy disk containing the performance song whose
tempo you want to change into the disk drive.
tempo you want to change into the disk drive.
2.
Use the Select [-] or [+] button to select the performance data you
wish to load.
wish to load.
3.
Press the [Load] button.
The selected performance data will be loaded into internal memory.
4.
Determine the tempo with the Tempo [
] and [
] buttons.
5.
Hold down the [Reset] button and press the [Rec] button.
The Number of Measures for Loop Recording
AT-20S.e.book 78 ページ ２００３年１１月１０日 月曜日 午後２時３７分