Roland AT20s Manuale Utente
92
Various Other Settings
Changing How the Solo
Voice Responds (Solo Mode)
When the Solo voice is assigned to the Upper keyboard, you
can specify how the Solo voice will respond when more than
one key is pressed.
can specify how the Solo voice will respond when more than
one key is pressed.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to
select “Solo Mode.”
fig.12-05
3.
Press the Value [-] and [+] buttons to change
the setting for Solo Mode.
TOP NOTE
The Solo voice will sound the highest
note that is played for the Solo part.
note that is played for the Solo part.
LAST NOTE
The Solo voice will sound the note that
was most recently played for the Solo
part.
was most recently played for the Solo
part.
POLYPHONIC
The Solo voice will sound all notes that
are played for the Solo part.
are played for the Solo part.
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
play/Exit] button.
Damper Pedal Assignment
You can specify which keyboard will be affected when you
press the Damper (Sustain) pedal.
press the Damper (Sustain) pedal.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to
select “Damper Pedal.”
3.
Press the Value [-] and [+] buttons to change
the setting for Damper Pedal.
to UPPER
The effect is applied to the voices played
on the Upper keyboard.
on the Upper keyboard.
to LOWER
The effect is applied to the voices played
on the Lower keyboard.
on the Lower keyboard.
* If the voice is a percussive voice (such as a Piano voice), the tone
will be sustained, but fade away just like an acoustic piano. Is
the voice is a non-percussive instrument (such as a String
voice), the tone will be sustained as long as the pedal is
depressed.
the voice is a non-percussive instrument (such as a String
voice), the tone will be sustained as long as the pedal is
depressed.
Glide Destination
You can select the keyboard to which the effect will apply
when you operate the Glide effect.
when you operate the Glide effect.
1.
Press the [Utility] button.
2.
Press the Menu [
] and [
] buttons to
select “Glide.”
fig.12-12
3.
Press the Value [-] and [+] buttons to change
the setting for Glide.
to UPPER
The effect is applied to the voices played
on the Upper keyboard.
on the Upper keyboard.
to LOWER
The effect is applied to the voices played
on the Lower keyboard.
on the Lower keyboard.
to PEDAL
The effect is applied to the voices played
on the Pedalboard.
on the Pedalboard.
To return to the basic screen, press the [Utility] or [Dis-
play/Exit] button.
play/Exit] button.
AT-20S.e.book 92 ページ ２００３年１１月１０日 月曜日 午後２時３７分