Roland AT20s Manuale Utente

 

If you want to hook up an external instrument to the AT-20S, 

then this chapter is for you.

 

You can connect external MIDI instruments to these 

connectors to exchange performance information.

 

You can some awesome sounds if you connect speakers or 

other audio equipment to these jacks. You can also hook up a 

cassette recorder to record your performances.

 

You can connect a computer to this connector to exchange 

performance information. 

 

Set this switch to Mac, PC-1, or PC-2 according to the type 

computer that’s connected.

You can also switch between connections to the MIDI Out/In 

connectors and the Computer connector.

 

If you’re planning on connecting the AT-20S to other 

equipment with cables, be sure to follow the steps shown 

below to make the connections. By turning on or off devices 

in the wrong order, you risk causing malfunction and/or 

damage to speakers and other devices.

 

●

 

 After use, follow the steps below to switch off the power.

 

■

 

You can hook up a tape recorder or other audio device and 

record your performances on the AT-20S. Use an audio cable 

to connect the input jack on the audio set or amp mixer to 

one of the output jacks on the AT-20S. Use an audio cable 

with a standard plug. When purchasing an audio cable, 

please consult the vendor where you bought the AT-20S.

Pedal

Computer

PC-1

Mac

PC-2

MIDI

Out

In

MIDI

L (mono)

R

Output

L (mono)

R

Output

AT-20S.e.book 98 ページ ２００３年１１月１０日　月曜日　午後２時３７分