Roland FP-7 Manuale Utente

 

Before You Play

 

Connect the included pedal to one of the Pedal jacks.
The operation of the pedal will differ depending on the jack to 
which it’s connected.

 

fig.pedals-e.eps

 

Unplugging a pedal cord from the unit while the 
power is on may cause the pedal’s effect to be 
applied without stopping. The power of the FP-7 must 
be turned off before inserting or removing a pedal 
cord.

By obtaining a second and third pedal, you can then 
use three pedals simultaneously. If you wish to 
purchase the optional pedal (DP series), please 
contact the dealer where you purchased the FP-7.

You can connect the expression pedal to the 
Sostenuto/ (FC1) or the Soft/ (FC2) jack to adjust the 
volume. Use only the specified expression pedal (EV-
5; sold separately). By connecting any other 
expression pedals, you risk causing malfunction 
and/or damage to the unit.

 

Use this pedal to sustain the sound. 
While this pedal is held down, notes will be sustained for an 
extended time even if you release your fingers from the 
keyboard.
The pedal included with the FP-7 functions as a half-damper 
pedal, which allows you to adjust the amount of resonance.

On an acoustic piano, holding down the damper pedal will 
cause the strings for notes other than the ones you actually 
play to vibrate in sympathy with what you’ve played, 
producing a rich resonance. The FP-7 simulates this 
sympathetic vibration (damper resonance).

Set the switch on the included pedal to “Continuous” 
when the pedal is connected.

 

The notes you are pressing when this pedal is depressed will 
be sustained.

With the pedal connected to the Sostenuto / (FC1) 
jack, it can be assigned other functions as well. Refer 
to “Changing How the Pedals Work” (p. 118), 
“Using a Pedal to Switch Registrations” (p. 91).

 

This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces a sound that is 
not as strong as when otherwise played with the equivalent 
strength. This is the same function as the left pedal of an 
acoustic piano.
The softness of the tone can be varied subtly by the depth to 
which you press the pedal.

With the pedal connected to the Soft / (FC2) jack, it 
can be assigned other functions as well. Refer to 
“Changing How the Pedals Work” (p. 118), “Using 
a Pedal to Switch Registrations” (p. 91).

 

The pedal will operate as a damper 
pedal.

 

The pedal will operate as a sostenuto 
pedal.
Alternatively, you can assign a 
different function (p. 91, p. 118).

 

The pedal will operate as a soft pedal.
Alternatively, you can assign a 
different function (p. 91, p. 118).

FP-7-e.book 21 ページ ２００６年１２月１４日　木曜日　午前１０時５７分