Roland FR-7 Manuale Utente
Selecting Easy or Full mode
V-Accordion
r
19
Selecting Easy or Full mode
At first, the FR-7/FR-5 is configured to start up in “Easy”
mode. In that mode, only the main parameters can be
selected. It has the advantage that you do not feel
overwhelmed by the FR-7/FR-5’s possibilities. The
downside, however, is that there are certain (albeit
rather specialized) parameters you cannot even select.
mode. In that mode, only the main parameters can be
selected. It has the advantage that you do not feel
overwhelmed by the FR-7/FR-5’s possibilities. The
downside, however, is that there are certain (albeit
rather specialized) parameters you cannot even select.
To use the full potential of your FR-7/FR-5, you need to
select “Full” mode:
select “Full” mode:
(1) Switch on the FR-7/FR-5.
See “Switching the power on and off” on p. 16. The
display now looks more or less as follows:
display now looks more or less as follows:
Let us agree to call this page the “Main page”.
(2) Press and hold the [EXIT÷JUMP] button until the
display looks as follows:
(3) Press registers [10] and [2] to jump to the following
page:
(4) Press the [DATA÷ENTER] knob.
(5) Rotate the [DATA÷ENTER] knob or press the [UP]/
[DOWN] buttons to select either “Full” (show all
parameters) or “Easy” (show only the main param-
eters).
parameters) or “Easy” (show only the main param-
eters).
(6) Press [EXIT÷JUMP] to return to the main page.
This setting is remembered until you switch off the
FR-7/FR-5. If you want to keep it, proceed as follows:
FR-7/FR-5. If you want to keep it, proceed as follows:
(7) Press and hold the [MENU÷WRITE] button until the
following page appears:
(8) Rotate the [DATA÷ENTER] knob (or use the [UP]/
[DOWN] buttons) to select “Global”.
(9) Press the [DATA÷ENTER] knob to confirm your
selection.
Note: The GLOBAL page shows all parameters that are saved to
the Global memory (there is only one such memory).
the Global memory (there is only one such memory).
(10) Press the [MENU÷WRITE] button to save your
changes. The display briefly shows a confirmation:
Note: If you don’t save the edited Global settings, they will be
used until you switch off the FR-7/FR-5 (or change the settings
again).
used until you switch off the FR-7/FR-5 (or change the settings
again).
(11) Press the [EXIT÷JUMP] button to return to the Main
page.