Roland CDX-1 Manuale Utente

Panel Descriptions

fig.14-15e

This button switches 

 (p. 134) effect on 

and off. If CD BURNING mode is selected, this will be turned on 
automatically.

Access a screen where you can set the master balance.

➔ “Adjusting the overall volume balance—Master balance” 

Shows the status of the Master track. The current state is 
shown by the color of the button.

➔ Mixdown (p. 133), CD Burning (p. 135)

• Blinking in red: Indicates currently in recording-standby 

mode.

• Lit in red: 

Indicates currently recording

• Lit in green:

Recorded Master track data is being 
played back.

You can adjust the overall volume level

Various information regarding operation will be displayed here.

fig.14-16

Indicates the current time location of the song in “Current 
track number/Minute/Second.”

Indicates the current time location of the song in “Hour/
Minute/Second/Frame.”
● Frame display
The number displayed after the current time indicates the 
number of frames for the current location in the song.

At the factory settings, one second is set to 30 frames (non-
drop). This is one type of a specification known as MTC (MIDI 
Time Code), and when you use the CDX-1 to play in 
synchronization with another MIDI device, you will need to 
set both devices to the same MTC type.
➔  “Using MTC (Master)” (p. 154)

Indicates the current time location of the song in “Measure/
Beat/Tick.”

This shows the number of the marker at the current location. 
If no marker is registered at the current location, the number 
of the marker immediately before the current location will be 
displayed.

If the current location is earlier than marker number “001,” or if 
no marker has been registered, the display will indicate “---”.
➔ “Assigning markers within a song—Marker” (p. 129)

This indicates 

 symbol the sequence track that is selected as 

the playback destination.
➔ “Playing a sequence track” (p. 96)

This indicates the number of the currently selected pad bank.
➔  “Switching pad banks” (p. 54)