Roland FP-2 Manuale Utente
50
Chapter 4 Other Functions
Making the Settings for the
USB Driver
If you intend to connect to a computer using the USB
connector, you need to make the following setting before you
make the connection.
connector, you need to make the following setting before you
make the connection.
1.
Hold down the [-] and [+] button, press the
[Power] switch to turn on the power.
[Power] switch to turn on the power.
fig.04-04
2.
Press the [-] or [+] buttons to select the driver.
3.
Turn on the power once again.
Restoring the Settings to the
Factory Condition
Factory Condition
(Factory Reset)
The settings stored in the FP-2 can be returned to their
factory settings.
factory settings.
* Executing “Factory Reset” results in deletion of the Settings.
If you want to keep any data you have stored, use the “Bulk
Dump” operation to save the data to an external sequencer (p.
49).
Dump” operation to save the data to an external sequencer (p.
49).
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
[Power] switch to turn off the power.
2.
Hold down the [Reverb] button, and press the
[Power] switch to turn on the power.
[Power] switch to turn on the power.
fig.04-04
Continue pressing the button until “Fct” appears in the
display.
display.
fig.04-04
“Fct” appears in the display, and the button’s indicators
flash for several seconds. Then, the screen and buttons
go back to normal.
flash for several seconds. Then, the screen and buttons
go back to normal.
Disabling Everything Except
Piano Play (Panel Lock)
Once Panel Lock is engaged, the instrument will allow only
normal piano playing. All buttons (except for the [Reverb]
button, the [Sound Control] button, and the [Equalizer]
button) will not function. This prevents the settings from
being inadvertently modified even if children press the
buttons accidentally.
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
[Power] switch to turn off the power.
2.
Hold down the [Piano] button and press the
[Power] switch to turn on the power.
[Power] switch to turn on the power.
fig.disp—-
Then, continue to hold down these two buttons by
following display will appear.
following display will appear.
fig.04-04
3.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
will be heard.
It cannot be changed to another tone.
4.
To defeat the Panel Lock function, turn the
volume down to the minimum, and turn on the
power once again.
volume down to the minimum, and turn on the
power once again.
Indication
Description
vdr
(Vender)
Select this when using the supplied driver
with a USB connection.
with a USB connection.
GEn
(Generic)
Select this when using a generic USB driver
included with the OS with a USB connection.
included with the OS with a USB connection.
While holding
down...
down...
Turn on the Power
While holding
down...
down...
Turn on the Power
While holding
down...
down...
Turn on the Power
FP-2_e.book 50 ページ ２００４年１１月２６日 金曜日 午後４時２５分