Roland FP-5 Manuale Utente
53
Chapter 4 Other Functions
Making the Settings for the
USB Driver
If you intend to connect to a computer using the USB
connector, you need to make the following setting before you
make the connection.
connector, you need to make the following setting before you
make the connection.
1.
Switch to Function mode, and press the [Tone
Wheel] button.
Wheel] button.
fig.04-04
2.
Press the [-] or [+] buttons to select the driver.
Restoring the settings to the
factory condition
factory condition
(Factory Reset)
The settings stored in the FP-5 can be returned to their
factory settings.
* Executing “Factory Reset” results in deletion of the Settings.
If you want to keep any data you have stored, use the “Bulk
Dump” operation to save the data to an external sequencer (p.
52).
Dump” operation to save the data to an external sequencer (p.
52).
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
[Power] switch to turn off the power.
2.
Hold down the [Pedal control] button, and press
the [Power] switch to turn on the power.
the [Power] switch to turn on the power.
Continue pressing the button until “Fct” appears in the
display.
display.
fig.04-04
After “Fct” is displayed, the screen and buttons go back
to normal.
to normal.
Disabling Everything Except
Piano Play (Panel Lock)
The “Panel Lock” function locks the FP-5 in a state where
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
2.
Hold down the [Piano] button and press the [Power]
switch to turn on the power.
Then, continue to hold down these two buttons by
following display will appear.
following display will appear.
fig.disp—-
3.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
will be heard.
It cannot be changed to another tone.
4.
To defeat the Panel Lock function, turn the
volume down to the minimum, and turn on the
power once again.
volume down to the minimum, and turn on the
power once again.
Indication
Description
vdr
(Vender)
Select this when using the supplied
driver with a USB connection.
GEn
(Generic)
Select this when using a generic USB
driver included with the OS with a
USB connection.
flashes in red
FP-5_e.book 53 ページ ２００５年１月２６日 水曜日 午前１０時２２分