Roland EP-760 Manuale Utente
27
Connecting external devices
Connecting to audio
equipment
equipment
You can connect audio devices to play the sound of the
ep-760 through the speakers of your audio system, or to
record your performance on a tape recorder or other record-
ing device.
ep-760 through the speakers of your audio system, or to
record your performance on a tape recorder or other record-
ing device.
When connecting, please use an audio cable with a standard
phone plug (sold separately).
phone plug (sold separately).
Connection examples
NOTE
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the sound of the ep-760 through the
speakers of an audio system/Recording the
performance of the ep-760 on a recording device
speakers of an audio system/Recording the
performance of the ep-760 on a recording device
Use the following procedure when turning on the
power:
power:
A
Turn on the power of the ep-760.
B
Turn on the power of the connected device.
C
Adjust the volume of each device.
When recording ep-760 performances with a cassette
deck, etc
deck, etc
.
D
Start recording on the connected device.
E
Perform on the ep-760.
F
When the performance ends, stop recording on the
connected equipment.
connected equipment.
Playing the sound of an audio device through the
speakers of the ep-760
speakers of the ep-760
Use the following procedure when turning on the
power.
power.
A
Turn on the power of the connected device.
B
Turn on the power of the ep-760.
C
Adjust the volume of each device.
Turning off the power
A
Set the volume of the ep-760 and of the connected
devices to the minimum position.
devices to the minimum position.
B
Turn off the power to the ep-760.
C
Turn off the connected equipment.
Connecting to a computer
You can use a USB MIDI interface cable (sold sepa-
rately) to connect the ep-760 to your computer.
If the ep-760 is connected to a computer running
sequencer software such as Roland’s “Visual MT”, a
song you’ve recorded on the ep-760 can be saved on
your computer.
rately) to connect the ep-760 to your computer.
If the ep-760 is connected to a computer running
sequencer software such as Roland’s “Visual MT”, a
song you’ve recorded on the ep-760 can be saved on
your computer.
Connection examples
NOTE
•
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
•
In order to make connections to your computer, you must
install MIDI driver software on your computer. For details, refer
to the owner’s manual for your MIDI interface.
install MIDI driver software on your computer. For details, refer
to the owner’s manual for your MIDI interface.
Use a USB MIDI interface cable to connect the USB con-
nector of your computer to the MIDI connectors of the
ep-760.
nector of your computer to the MIDI connectors of the
ep-760.
6. Connecting external devices
Input R/L
(Line In, Aux In)
ep-760
Output R/L
(Line Out, Aux Out)
ep-760
MIDI IN
MIDI OUT
USB Connector
of your Computer
of your Computer
USB on your
computer
Computer
UM-1, etc.
ep-760
ep-760.GB Page 27 Thursday, May 16, 2002 8:03 PM