Roland KR111 Manuale Utente

 Basic song playback

KR111 Digital Intelligent Piano 

r

The KR111 comes with more than 50 internal songs, 
you can listen to right away.

(1) Press the [Song] button (its indicator lights) to 

switch to Song mode.

The display now shows the name of the first song in 
the KR111’s internal memory. 

• If you want to play back a song from floppy disk, 

insert the disk into the drive (front right).

(2) Use [√][®] to select the memory area that contains 

the song you wish to play back.

The KR111 provides three memory areas for songs:

• USR: This where the song data you record, or the 

data of the last disk song you loaded are temporarily 
stored. The data in this RAM memory are erased 
when you switch off the KR111.

• Internal memories: This is the memory area inside the 

KR111 that contains more than 50 songs when the 
KR111 is shipped. 

After a while, the entire song name starts scrolling 
through the display.

Note: If the selected song does not contain an “internal 
song name”, the display shows the file name (which is usu-
ally shorter).

• Songs on floppy disk (D01~…): This area refers to a 

floppy disk you insert into the KR111’s drive. The 
number of available songs depends on the floppy 
disk, of course.

Note: The KR111 can also read Roland “i” format files.

(3) Use [+][–] to select a desired song within the 

selected group.

This is only necessary for the internal songs (numbers 
1~…) or a floppy disk (songs D01~…). There is only 
one USR memory.

After selecting memory 1 (internal area) or D01 (first 
disk memory), the display shows a flashing Ent mes-
sage. You can ignore this if you like, and proceed with 
the next step (or you can press [Enter] to load the 
song into the USR area).

Note: If you forgot to insert a floppy disk into the drive, 
the display shows “No Disk” when you attempt to 
select a file on disk.

(4) After making sure that the correct song has been 

selected, you can press [Play÷Stop¥®÷ª] to load it and 
immediately start playback.

The [Play÷Stop¥®÷ª] indicator lights and the Count/
Metronome indicators flash to indicate the tempo 
and beats.

You can already select a new song while the current 
one is still playing. If you want to listen to it before 
the current song is finished, stop playback by press-
ing [Play÷Stop¥®÷ª], then press that button again. 
Otherwise, wait until the current song is finished, 
then press the [Play÷Stop¥®÷ª] button to start play-
back of the new song.

Liebestr

Ent

Jamming

Ent