Behringer UZ400 Dépliant
ULTRA FUZZ UZ400
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA
FUZZ UZ400. This effects pedal is ideally suited for electric guitars and recreates the
classic and burning fuzz tone of the '60s and '70s.
FUZZ UZ400. This effects pedal is ideally suited for electric guitars and recreates the
classic and burning fuzz tone of the '60s and '70s.
1. CONTROLS
Top view
The LEVEL control adjusts the output level.
The TONE control allows you to shape your overall sound.
The FUZZ control adjusts the intensity of the fuzz distortion effect.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The UZ400 has no on/off switch. As soon as you insert the plug into the IN
connector, the UZ400 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
connector, the UZ400 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.