Roland JUPITER-80 Manuale Utente

Controlling the Rotary Effect and Reverb

The rotary effect adds modulation similar to what is produced by 

rotary speakers to the sound. Reverb applies the reverberation 

that accompanies a sound played in a hall or other acoustic 

environment.
You can control these effects by using panel buttons.

The ROTARY SOUND [ON/OFF] button and [SLOW/FAST] button 

allow you to control the effect if a rotary effect is assigned to MFX.

Live Set (p . 58) .

The rotary effect will turn on (the button will light).

The speed of the rotary effect will change.

The rotary effect can be switched between two settings: “SLOW” 

and “FAST.”

The effect produced when the rotary speaker is 

turning slowly.

The effect produced when the rotary speaker is 

turning rapidly.

When you switch the rotary effect from “SLOW” to “FAST,” the 

modulation speed will increase; when you switch from “FAST” to 

“SLOW,” the modulation speed will decrease.

The REVERB [ON/OFF] button simultaneously turns on/off the 

output of the Live Set’s reverb and of the reverb shared by the Solo 

and Percussion Parts.
If you want reverb to always be off, turn off the REVERB [ON/OFF] 

button.

The illustration below shows how the REVERB [ON/OFF] button 

works.

REVERB 

[ON/OFF]

 

 

 

The state of the REVERB [ON/OFF] button is not saved. It will 

automatically turn on when you turn on the power.