Roland JUPITER-80 Manuale Utente

•  If a Synth Tone has been edited, a check mark (yellow) is shown 

at the right of the tone name.

You can turn a Partial on/off by touching the <Partial SW>.
By touching <Partial SELECT> you can select the Partial that you 

want to edit.

On

Off

Selected

–

•  You can select two or more Partials by holding down the [SHIFT] 

button and touching <Partial SELECT>.

•  When the Synth Tone Edit screen is displayed, you can use the 

PART BALANCE area of the panel to turn the three Partials on/off 

and adjust their volume.

Turns each Partial 

on/off.

Controls the AMP level 

of each Partial.

The AMP level of each 

Partial is shown by the 

level meter.

•  By holding down the [SHIFT] button and pressing the PART 

[PERC ON/OFF], [LOWER ON/OFF], or [UPPER ON/OFF] buttons, 

you can select the Partial that you want to edit. 

Partial 1

Partial 2

Partial 3

•  To edit two or more Partials, simultaneously hold down the PART 

buttons of the Partials that you want to edit.