Roland JUPITER-80 Manuale Utente

The Visual Control screen (p. 34) will appear.

1–16

Specifies the MIDI channel used to switch images.

1–16

Specifies the MIDI channel used to switch video effects.

OFF, CC01–CC31, CC64–CC95, Bender,  

Ch Aftertouch

Specifies the controller used to change the video playback speed.

0.1–1.0–2.0, 0.5–1.0–2.0,  

0.0–1.0–4.0, 0.5–1.0–4.0,  

0.0–1.0–8.0, 0.5–1.0–8.0,  

0.0–1.0–16.0, 0.5–1.0–16.0,  

0.0–1.0–32.0, 0.5–1.0–32.0,  

0.0–2.0–4.0, 0.0–4.0–8.0,  

0.0–8.0–16.0, 0.0–16.0–32.0,  

-2.0–1.0–4.0, -6.0–1.0–8.0

Specifies the range in which the video playback speed will change.
The three values specify the playback speed (as a multiple of normal speed) when the 

controller selected by Playback Speed Ctrl is at the minimum value, center value, and 

maximum value, respectively.

OFF, CC01–CC31, CC64–CC95, Bender,  

Ch Aftertouch

Specifies the controller used to control the dissolve time (video switching time).

OFF, CC01–CC31, CC64–CC95, Bender,  

Ch Aftertouch

Specifies the controller used to control the video effect.

E1–G7

Specifies the range of keys that will switch images.

OFF, Assignable

Turn this Assignable if you want note data to switch images. Normally, program change 

messages are used to switch images, so you would leave this OFF.

OFF, ON

Specifies whether the JUPITER-80 will (ON) or will not (OFF) produce sound when you play 

notes in the zones specified for Keyboard Range Lower and Keyboard Range Upper.

*  The Local Sw setting is not saved. It will automatically be ON when you turn on the 

power.

Use the system setting “Visual Control Mode” (p. 86) to specify whether Visual Control is being used to control a MIDI Visual Control compatible 

device or a V-LINK compatible device.