Roland VR-700 Manuale Utente

 

Getting Ready

 

If you place the VR-700 on a stand, you must use the KS-G8 (sold separately).

• When placing the VR-700 on the stand, be careful not to pinch your fingers between the instrument and the stand.

• When lifting the VR-700 onto the stand, make sure to enlist the help of at least one other person.

• Using the VR-700 with any other stand may produce an unstable situation, possibly causing the instrument to fall or overturn, and

resulting in injury or damage.

• For details on how to assemble the stand, refer to the owner’s manual that accompanied the stand.

 

fig.VKvsKS-G8.eps

 

• Position rubber feet “A” on the outside of the stand’s rubber pads.

• Position rubber feet “B” directly above the stand’s arms.

• Position rubber feet “C” so that they contact the inside of the stand’s rubber pads.

* Make sure that the VR-700’s six rubber feet (A–C) are not resting on the stand’s rubber pads.

 

• Is the volume level of the VR-700 or connected amp turned all the way down?

• Is the power to the VR-700 or connected amp turned off?

 

fig.ConnectPowerCoad.eps

 

Placing the VR-700 on the KS-G8 Stand

Connecting the Power Cord

VR-700_e.book 18 ページ ２００９年１１月１８日　水曜日　午前９時２４分