Roland VR-700 Manuale Utente
47
Storing Your Favorite Settings (Favorites)
The organ sound settings and ensemble sound settings for the
three parts, along with the Layer and Split status, can be saved as a
“favorite” in the VR-700’s internal memory.
The VR-700’s internal memory can store 64 favorites.
A set of these 64 favorites can also be backed up to USB memory
(sold separately) connected to the USB MEMORY connector.
* Some parameters of Function mode are stored independently for
each favorite. For details on the parameters stored for each favorite,
fig.pnl-favolite.eps
When the VR-700 is shipped from the factory, the 64 favorites
contain various sounds and settings.
Try selecting the factory-set favorites, and listen to their sounds.
1.
Hold down the [BANK] button and press one of the [1]–
[8] buttons to select a bank.
While you hold down the [BANK] button, the button
corresponding to the currently selected bank will light.
2.
Press one of the [1]–[8] buttons to select a favorite.
The selected button will light.
3.
Play the keyboard and try out the sound.
If you’re selecting a different favorite within the same bank,
there’s no need to re-specify the bank.
1.
While holding down the [WRITE] button and [BANK]
button, press one of the FAVORITE [1]–[8] buttons to
specify the save-destination bank.
The display will indicate the number of the bank you specified.
You don’t need to specify the bank over again if you intend to
save the Favorite in the current bank.
2.
Hold down the [WRITE] button and press one of the
FAVORITE [1]–[8] buttons to specify the save-destination
favorite number.
The display will indicate the favorite number you specified, and the
current settings will be saved as a favorite.
If you want to erase the 64 favorites stored in internal memory,
returning them to their factory settings, execute the Factory Reset
Selecting a Favorite
Saving the Current Settings as a
Favorite
Favorite
Initializing the Favorites
VR-700_e.book 47 ページ ２００９年１１月１８日 水曜日 午前９時２４分