Roland LX-10F Manuale Utente
16
Before You Play
9
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
Turning the Power On
1.
Move the [Volume] slider all the way to the left to
minimize the volume.
2.
Press the [Power] switch.
The power will turn on, and [Piano] button and [Reverb]
button will light.
After a brief interval, you’ll be able to produce sounds
by playing the keyboard.
•
This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
(a few seconds) after power up is required before the unit will
operate normally.
•
Always make sure to have the volume level turned down
before switching on power. Even with the volume all the way
down, you may still hear some sound when the power is
switched on, but this is normal, and does not indicate a
malfunction.
before switching on power. Even with the volume all the way
down, you may still hear some sound when the power is
switched on, but this is normal, and does not indicate a
malfunction.
3.
Use the [Volume] slider to adjust the volume
Turning the Power Off
1.
Move the [Volume] slider all the way to the left to
minimize the volume.
2.
Press the [Power] switch.
The screen goes blank and the power is turned off.
If you need to turn off the power completely, first turn off
the POWER switch, then unplug the power cord from the
Turning the Power On/Off
1
2
ON
OFF
LX-10F_e.book 16 ページ ２０１０年１月１４日 木曜日 午後１０時４５分