Roland LX-10F Manuale Utente

 

Connecting to Other Devices

 

The following become possible once you connect a USB cable 

(available separately) between the USB connector on the LX-10F’s 

left end of the bottom panel and the USB connector of your 

computer.

• You can use the LX-10F to play sounds from SMF music files played 

back with MIDI software.

• By exchanging MIDI data with sequencer software, you can save 

songs recorded with the LX-10F to your computer, and enjoy a 

variety of musical control and editing features.

 

fig.aaa

 

* Connect the LX-10F to your computer as shown right.

Normally, you don’t need to install a driver in order to connect the 

LX-10F to your computer. However, if some problem occurs, or if the 

performance is poor, using the Roland original driver may solve the 

problem.

Specify the USB driver you want to use, and then install the driver.

 

If you change this setting, turn on the power once again.

 

This setting is remembered even when the power is turned off.

 

For details on downloading and installing the Roland original 

driver, refer to the Roland website.

 

Connecting a Computer

 

Changing the USB Driver Settings
 (USB Driver)

 

Generic

Choose this if you want to use the standard USB driver that 
was included with your computer. 
Normally, you should use this mode.

Original

Choose this if you want to use a USB driver downloaded 
from the Roland website.

Here you can download the original driver, and view the 

installation procedure and operating requirements.

Roland website: http://www.roland.com/

LX-10F_e.book 69 ページ ２０１０年１月１４日　木曜日　午後１０時４５分