Roland XV-88 Manuale Utente

158

Chapter 7. Adding Effects

CHO OUT (Chorus Output)

fig.07-15

Output Assign (Chorus Output Assign)

Selects the pair of OUTPUT jacks to which the Chorus sound
is routed when Chorus Output Select is set to MAIN or
MAIN+REV.

: Output to the OUTPUT A (MIX) jacks in stereo.

: Output to the OUTPUT B jacks in stereo.

When Chorus Output Select is set to REV, this setting
will have no effect.

If the Mix/Parallel parameter (SYSTEM/SETUP/
SYSTEM SETUP) is set to MIX, all sounds are output
from the OUTPUT A (MIX) jacks in stereo (p. 169).

Level (Chorus Level)

Adjusts the volume of the sound that has passed through
chorus.

Select (Chorus Output Select)

Specifies how the sound routed through Chorus will be
output.

MAIN

: Output to the OUTPUT jacks in stereo.

REV

: Output to Reverb in mono.

MAIN+REV

: Output to the OUTPUT jacks in stereo, and to

Reverb in mono.

When set to MAIN or MAIN+REV, the OUTPUT jack
from which the sound is output is set in Chorus Output
Assign.

Making Reverb Settings

You can make the settings for Reverb used by Patches/
Rhythm Sets/Performances.

Setting Procedure

1. After confirming that you are in Patch/Rhythm Set/

Performance mode, select the desired Patch/Rhythm
Set/Performance (p. 29, p. 35, p. 39).

2. Press [EDIT], getting the indicator to light, and then

press the [EFFECTS] function button.

3. Press

to display the desired Edit page.

4. Press

to move the cursor to the parameter

you’re going to modify.

5. Use the VALUE dial, [INC/+]/[DEC/-], or the numeric

keys to change the parameter value.

6. When you finish making settings, press [EXIT] to return

to the previous PLAY page.

An asterisk

will be displayed at the left of the Patch/

Rhythm Set/Performance group. This indicates that the
Patch/Rhythm Set/Performance settings have been
modified.

If you select another Patch/Rhythm Set/Performance in
the group with an asterisk

, the modified Patch/