Roland AX-Synth Manuale Utente
Panel descriptions
10
Front panel
A
PGM CHANGE INC & DEC buttons
These buttons are used to transmit program change
messages on the selected MIDI channel. They work in
a sequential fashion (incremental or decremental).
Program change numbers can also be entered
directly, however (see p. 28).
messages on the selected MIDI channel. They work in
a sequential fashion (incremental or decremental).
Program change numbers can also be entered
directly, however (see p. 28).
B
TX ON button
This button is used to enable (button lights) or disable
the transmission of MIDI messages. Pressing it while
holding down the
the transmission of MIDI messages. Pressing it while
holding down the
[SHIFT]
button allows you to use
the keys in the highest octave (NUMERIC KEYPAD)
and the keys in the lowest octave (TX MIDI CHAN-
NELS) for numeric entry of program change or MIDI
channel numbers.
and the keys in the lowest octave (TX MIDI CHAN-
NELS) for numeric entry of program change or MIDI
channel numbers.
C
TRANSPOSE button
Press this button to display the current transposition
interval. Holding it while pressing the OCTAVE/VARI-
ATION
interval. Holding it while pressing the OCTAVE/VARI-
ATION
[+]
/
[–]
buttons allows you to set the interval in
semi-tone steps.
D
V-LINK button
Press this button to activate the AX-Synth’s V-LINK
control function (see p. 33).
control function (see p. 33).
E
SHIFT button
Pressing this button allows you to select the second-
ary (hidden) function of some of the other buttons.
ary (hidden) function of some of the other buttons.
F
Display
This three-character display keeps you posted about
the selected Tone, mode or the parameter value you
set.
the selected Tone, mode or the parameter value you
set.
G
TONE buttons
These buttons are used to select the desired Tone
family, SuperNATURAL, SPECIAL or FAVORITE Tone
(the button you press lights blue).
family, SuperNATURAL, SPECIAL or FAVORITE Tone
(the button you press lights blue).
H
VARIATION DEC/– & INC/+ buttons
These buttons allow you to select a Tone from the
active Tone family (see above) in a sequential fashion.
This function can also be assigned to the OCTAVE/
VARIATION
active Tone family (see above) in a sequential fashion.
This function can also be assigned to the OCTAVE/
VARIATION
[+]
/
[–]
A third, usually faster, way to select Tones is by hold-
ing down
ing down
[SHIFT]
while using the keys in the highest
octave (NUMERIC KEYPAD).
I
FAVORITE A, B buttons
These buttons allow you to select the corresponding
bank of “favorite” Tones.
bank of “favorite” Tones.
J
WRITE button
The
[WRITE]
button is used to assign the desired
Tones to the 16 memories of FAVORITE banks “A” and
“B” and to save all settings you change.
“B” and to save all settings you change.
2. Panel descriptions
AX-Synth_e2 Page 10 Monday, October 12, 2009 3:41 PM