Roland C-200 Manuale Utente
40
Additional Convenient Functionality <Advanced Operation>
By connecting a MIDI pedal keyboard to the C-200, you can play the C-200’s PEDAL division with your feet. (It can then no
longer be played via the keyboard, p. 23).
longer be played via the keyboard, p. 23).
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
on all devices before making any connections.
Connecting an optional pedal keyboard
that has a PK OUT socket
that has a PK OUT socket
1.
Before making any connections, make sure that all
devices are turned off.
devices are turned off.
2.
Using the special cable supplied with the pedal board,
connect the C-200’s PK In connector to the PK OUT
connector of your pedal keyboard unit.
See the illustration above.
connect the C-200’s PK In connector to the PK OUT
connector of your pedal keyboard unit.
See the illustration above.
If the special cable is connected, it is not necessary to
turn the power of the pedal keyboard unit on/off.
turn the power of the pedal keyboard unit on/off.
3.
Turn on the power on the C-200.
The left side of the C-200’s can no longer be used to play
the PEDAL part. You must therefore play it using the
pedal board. In return, the PEDAL part can now be
played polyphonically.
the PEDAL part. You must therefore play it using the
pedal board. In return, the PEDAL part can now be
played polyphonically.
■ Connecting a MIDI pedal keyboard unit
1.
Before making any connections, make sure that all
devices are turned off.
devices are turned off.
2.
Use a commercially available MIDI cable to connect the
C-200’s PK In connector to the MIDI OUT connector of
your MIDI pedal keyboard unit.
C-200’s PK In connector to the MIDI OUT connector of
your MIDI pedal keyboard unit.
Do not forget to connect the pedal keyboard’s adaptor to
a suitable wall outlet.
a suitable wall outlet.
3.
Turn on the MIDI pedal keyboard unit.
4.
Turn on the power on the C-200.
The left side of the C-200’s keyboard can no longer be
used to play the PEDAL part. You must therefore play it
using the pedal board. In return, the PEDAL part can
now be played polyphonically.
used to play the PEDAL part. You must therefore play it
using the pedal board. In return, the PEDAL part can
now be played polyphonically.
Connecting a pedal keyboard
PK OUT
External pedal keyboard
(PK-25A, PK-7A, etc.)
(PK-25A, PK-7A, etc.)
C-200_e.book Page 40 Monday, April 4, 2011 5:22 PM
MIDI OUT
MIDI CABLE
(PK-5A)
(PK-5A)
To a AC outlet
■