Roland AT800 Manuale Utente

 

Recording/Playing Back What You Play

 

Recording/Playing Back What You Play

 

Here’s how to play back a performance you’ve recorded.

 

fig.07-08-2.eps*

 

fig.05-08.eps

 

The Rec/Play screen appears.

 

fig.07-04-2.eps

 

The location at which playback will start will return to the 
beginning of measure 1.
If you wish to begin playback from the middle of the 
song, touch <Bwd> <Fwd> to move to the measure from 
which you wish to begin playback.

 

After playback reaches the end of the performance, it 
will stop automatically.

 

You can also begin playback by pressing the Composer 
[Play/Stop] button.

 

You can also stop playback by pressing the Composer 
[Play/Stop] button.

The Play and Stop functions can both be assigned to one of 
the foot switches located on each side of the Expression 
Pedal (p. 134).

You can specify whether or not the Expression Pedal will 
affect the playback and what you play while ATELIER music 
file is being played back (p. 212).

If you load performance data (such as SMF music files) that 
was not designed for an ATELIER Series instrument and play 
it back, you may find, when playing Rhythms and Automatic 
Accompaniment, that the music doesn’t sound quite like it 
should (For example, the wrong sounds could be played). If 
you want the data to be played back accurately, first press 
the [Reset] button prior to playback.

 

In cases such as when you want to perform in time with a 
song, you can have a count sound played before playback of 
the song begins, allowing you to synchronize your own 
performance with the song.
Playing back a song after playing the count sound is called 
“Count In.”

 

The metronome will play two measures (bars) of count-in 
before recording begins.

AT-800_e.book 175 ページ ２００８年１０月１５日　水曜日　午前９時３７分