Roland RD-300GX Manuale Utente
72
Detailed Settings for Each Function ([EDIT] Button)
The RD-300GX lets you store Setup data in internal memory or
in USB memory connected to the USB MEMORY connector on
the rear panel.
in USB memory connected to the USB MEMORY connector on
the rear panel.
A single, individual file containing a collection of 32 Setups
registered to the RD-300GX is called a “Setup file.”
registered to the RD-300GX is called a “Setup file.”
This Setup file can be saved in the RD-300GX’s internal
memory or on USB memory (sold separately) connected to the
USB MEMORY connector.
memory or on USB memory (sold separately) connected to the
USB MEMORY connector.
1.
Press the [EDIT] button, getting the indicator to
light.
light.
The Edit Menu screen appears.
2.
Use the [DEC] [INC] buttons to select “File,”
then press the [ENTER] button.
then press the [ENTER] button.
3.
Press the [DEC] button to select “Save SETUP,”
then press the [ENTER] button.
then press the [ENTER] button.
The following screen appears.
fig.disp
4.
Use the [DEC] [INC] buttons to select the
destination in which the Setups are to be stored.
destination in which the Setups are to be stored.
5.
Press the [ENTER] button.
The following screen appears.
fig.disp
6.
While continuing to hold down the [EXIT/
SHIFT] button, use the [DEC] [INC] buttons to
move the cursor to the positions where the
characters are to be input.
SHIFT] button, use the [DEC] [INC] buttons to
move the cursor to the positions where the
characters are to be input.
7.
Use the [DEC] [INC] buttons to enter the name.
Names can consist of up to 16 characters.
The following characters are available.
space ! # $ % & ' ( ) + , - . 0–9 ; = @ A–Z [ ] ^ _ ` a–z {
} ~
The following characters are available.
space ! # $ % & ' ( ) + , - . 0–9 ; = @ A–Z [ ] ^ _ ` a–z {
} ~
You can’t save a Setup file with a name that starts
with a “. (period)”. Do not use a “. (period)” at the
beginning of the name.
with a “. (period)”. Do not use a “. (period)” at the
beginning of the name.
8.
Repeat steps 6–7 to input the name.
9.
When you’ve finished entering the file name,
press the [ENTER] button.
press the [ENTER] button.
The following screen appears.
fig.disp
If you do not want to save the Setup file, press the [EXIT/
SHIFT] button.
SHIFT] button.
10.
Press the [ENTER] button once again to save
the Setup file.
“Executing...” appears in the display while the save
is in progress. Be sure never to turn off the power.
is in progress. Be sure never to turn off the power.
If a file with the same name has already been
saved, the confirmation message “Overwrite OK?”
appears. To overwrite the file, press the [ENTER]
button; to save the file under a different name,
press the [EXIT/SHIFT] button.
saved, the confirmation message “Overwrite OK?”
appears. To overwrite the file, press the [ENTER]
button; to save the file under a different name,
press the [EXIT/SHIFT] button.
11.
Press the [EDIT] button, extinguishing its
indicator.
Here’s how to load a previously saved Setup file.
The current settings are erased when a Setup file is
called up. Be sure to save you would like to keep
first before calling up.
called up. Be sure to save you would like to keep
first before calling up.
1.
Press the [EDIT] button, getting the indicator to
light.
light.
The Edit Menu screen appears.
2.
Use the [DEC] [INC] buttons to select “File,”
then press the [ENTER] button.
then press the [ENTER] button.
File Management (File)
Saving a Setup File (Save SETUP)
Value
Description
INT
The data will be stored in the RD-300GX’s internal
memory.
memory.
USB
The data will be stored on USB memory connected
to the USB MEMORY connector on the rear panel.
to the USB MEMORY connector on the rear panel.
Calling Up Setup File (Load SETUP)
NOTE
NOTE
RD-300GX_e.book 72 ページ ２００８年２月１４日 木曜日 午後１時２６分