Roland RD-300GX Manuale Utente

 

Error Messages/Other Messages

 

An error occurred during writing. The 
external media’s protect tab may be in the 
“Protect” (writing prohibited) position, or 
the external media may not yet be 
initialized.

- - -

 

No external media is inserted.

Insert the external media and try again.

 

There is not sufficient free memory in the 
save destination.

Delete unneeded files (Songs or Setup files) you’ve saved in 
internal or external memory and try again.

 

An error occurred during writing. 
The external media may be corrupted.

Insert other external media and try again. 
Alternatively, you can initialize the external media.

 

The file is unreadable. The data format is 
not compatible with the RD-300GX.

Only files in the following formats can be used.
• Setup files with an extension of “RDS”
• SMF music files with an extension of “MID”
• Audio files with an extension of “WAV,” “AIF,” or “MP3”
For details on audio file formats, refer to “Song Data Not 
Played Back Correctly” (p. 85)

 

Data was not called up in time for playback 
of the song.

You may be able to play the song after waiting a few 
seconds.

 

This audio format is not supported.

Please use 44.1 kHz 16-bit linear WAV/AIFF format audio 
file or MP3.

 

The internal memory capacity of the RD-
300GX is full.

You can’t fast-forward or rewind the song. 
Only playback is possible.

 

Due to an inordinate volume of MIDI 
messages received, the RD-300GX has 
failed to process them properly.

Reduce the amount of MIDI messages to be transmitted.

 

A MIDI cable has been disconnected.

Connect it properly and securely.

 

A MIDI transmission error has occurred.

Check the MIDI cable and connected MIDI device.

 

There may be a problem with the system.

Turn on the power once again, then repeat the procedure. 

 

The USB memory port was subjected to 
excessive current. 

Make sure that there is no problem with the USB memory, 
then turn the power off, then on again.

 

This is displayed when the [EXTERNAL/
INTERNAL] button is pressed with Rec 
Mode “ON.” 

When Rec Mode is “ON,” you cannot change the External 
settings. To make changes to the External settings, set Rec 
Mode to “OFF” (p. 78).

 

A file with the same name is already exists.

If you execute the procedure, the file will be overwrite. If you 
don’t want to overwrite, change a filename. 

 

• You attempted to copy an audio file
• You attempted to copy a file to USB 

memory even though USB memory was 
not connected

• You can’t copy audio files
• Connect USB memory

 

Buttons will not function.

Press the [EXIT/SHIFT] button to cancel.

RD-300GX_e.book 86 ページ ２００８年２月１４日　木曜日　午後１時２６分