Roland C-380 Manuale Utente

Saving and Loading Settings on USB Memory

Turn the [Select/Menu] knob to select the “No.” field.

Turn the [Value/Exit Menu] knob to select the area in

which you want to save the settings.

10.

Press the [SET] piston to save the data.

If you decide to cancel, press the [Value/Exit Menu] knob.

Never disconnect the USB memory or turn off the power while

sound settings are being saved to USB memory. Otherwise, the

sound settings will not be saved to USB memory, and

malfunction may occur.

Here’s how memory banks saved on USB memory can be loaded

into internal memory.

* When you load the memory banks into internal memory, all memory

banks currently stored in the organ’s internal memory will be

overwritten (replaced) by the memory banks that were saved in USB

memory. The memory banks stored in the organ’s internal memory

cannot be recovered, so please be sure to check the contents of

internal memory before you proceed.

Connect your USB memory to the USB memory connector

(p. 26).

From the main screen, press the [Select/Menu] knob.

Turn the [Select/Menu] knob to select “11 Save/Load

(USB).”

fig.LCD012.eps

Press the [Select/Menu] knob to access the “Save/Load

(USB)” screen.

Turn the [Select/Menu] knob to select “Load Memory

Bank.”

fig.LCD622.eps

Press the [Select/Menu] knob to access the “Load

Memory Bank” screen.

Turn the [Select/Menu] knob to select the “No.” field.

fig.LCD623.eps

Turn the [Value/Exit Menu] knob to select the number of

the sound settings that you want to load.

Press the [SET] piston.

A confirmation screen will appear.

If you decide to cancel, press the [Value/Exit Menu] knob.

fig.LCD624.eps

10.

Press the [SET] piston; the sound settings (registration)

will be loaded.

Never disconnect the USB memory or turn off the power while

sound settings are being loaded from USB memory. Otherwise,

the sound settings will not be loaded into the organ, and