Roland C-380 Manuale Utente
74
Connecting External Devices
By connecting to amplified speakers, you can play the organ’s
sounds through the external speakers. You can also record your
performance into a digital audio recorder or other recording device.
* To make connections, use audio cables with phone plugs, such as
the PCS-100PW (sold separately).
fig.ConnectAudio-2.eps
1.
Minimize the volume of the main unit and of your
speakers.
2.
Switch off the power to the main unit and your speakers.
3.
Use commercially available audio cables to make
connections.
4.
Switch on the main unit’s power.
5.
Switch on the power to the speakers.
6.
Adjust the volume of the main unit and your speakers.
When you play the main unit’s keyboard, the sound will be heard
from the main unit’s own speakers as well as from the connected
speakers.
To turn off the power
1.
Minimize the volume of the main unit and of your
speakers
2.
Switch off the power to your speakers.
3.
Switch off the main unit’s power.
Connecting to Audio Equipment
• When connection cables with resistors are used, the volume
level of equipment connected to the INPUT jacks may be low. If
this happens, use connection cables that do not contain
resistors.
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Connecting to Amplified Speakers
To Line Input connector
Amplified speaker
C-380_330_e.book 74 ページ ２０１０年４月２８日 水曜日 午後１０時１１分