Roland RG-3F Manuale Utente
81
Error Messages
Indication
Meaning
Error 01:
You can only read the music file. It can not be saved.
Error 02:
An error occurred during writing. The storage media’s protect tab may be in the “Protect” (writing prohibited)
position, or the storage media may not yet be initialized.
position, or the storage media may not yet be initialized.
Error 10:
No storage media is inserted. Insert the storage media and try again.
Error 11:
There is not sufficient free memory in the save destination.
Either insert other storage media or delete unneeded files and try again.
Either insert other storage media or delete unneeded files and try again.
Error 14:
An error occurred during reading.
The storage media may be corrupted. Insert other storage media and try again.
Alternatively, you can initialize the storage media.
The storage media may be corrupted. Insert other storage media and try again.
Alternatively, you can initialize the storage media.
Error 15:
The file is unreadable.
The data format is not compatible with the RG-1F/RG-3F.
The data format is not compatible with the RG-1F/RG-3F.
Error 16:
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [Play/Stop] button again.
After waiting several seconds, you may be able to play back the song by pressing the [Play/Stop] button again.
Error 18:
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio files.
Please use 44.1 kHz 16-bit linear WAV format audio files.
Error 30:
The internal memory capacity of the RG-1F/RG-3F is full.
Error 40:
The RG-1F/RG-3F cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the RG-1F/RG-3F.
Reduce the amount of MIDI data sent to the RG-1F/RG-3F.
Error 41:
A MIDI cable has been disconnected.
Connect it properly and securely.
Connect it properly and securely.
Error 43:
A MIDI transmission error has occurred.
Check the MIDI cable and connected MIDI device.
Check the MIDI cable and connected MIDI device.
Error 51:
There may be a problem with the system. Repeat the procedure from the beginning.
If it is not solved after you have tried several times, contact the Roland service center.
If it is not solved after you have tried several times, contact the Roland service center.
Error 65:
The External memory connector was subjected to excessive current.
Check the storage media to confirm that no damage has occurred to it.
Check the storage media to confirm that no damage has occurred to it.
RG-1F3F_e.book 81 ページ 2010年1月19日 火曜日 午前9時1分