Roland AT15 Manuale Utente
58
Using the Registration Buttons
Loading Previously Saved Registration
Sets Into the AT-15
Here’s how to recall a previously saved Registration set from the floppy disk
into the memory of the AT-15.
into the memory of the AT-15.
Registrations can be selected in the following two ways.
•
Loading a Set of Registrations
You can load a “set” (a collection of settings for Registration buttons [1]–[8])
from floppy disk.
from floppy disk.
•
Loading an Individual Registration
You can load settings for an individual Registration button [1]–[8].
■
Loading a Set of Registrations
Registrations Sets saved to a floppy disk can be loaded back into the
instrument.
instrument.
1.
Insert the floppy disk containing the Registration into the
disk drive.
2.
Press the [Registration] button (indicator lights).
3.
Press the Select [-] and [+] buttons to select the Registration
set that you wish to load.
fig.07-13
To cancel the procedure, press the [Registration] button.
4.
Press the [Load] button to execute loading.
When loading is complete, the basic screen reappears.
NOTE
Be aware that when you
load Registrations from a
disk, the Registrations that
were previously in internal
memory will be lost. It is a
good idea to save
important Registrations to
floppy disk (see p. 56).
load Registrations from a
disk, the Registrations that
were previously in internal
memory will be lost. It is a
good idea to save
important Registrations to
floppy disk (see p. 56).
AT-15_e.book 58 ページ ２００５年１月２１日 金曜日 午後８時１４分