Roland AT15 Manuale Utente

Pagina di 120
 
68
Record and Playback Your Performance
 
Rerecording Performance Data 
 
Recorded on the AT-15
 
You can record over recorded performance data.
 
fig.08-08
 
1.
 
Press the [Rec] button to enter into the recording standby 
mode.
 
The [Rec] button indicator will light, and the [Play/Stop] button indicator 
will blink.
The point at which recording begins is returned to the beginning of the song.
 
2.
 
Press the [Play/Stop] button to start recording.
 
When you press the [Play/Stop] button, the metronome will play two 
measures (bars) of count-in before recording begins. 
During recording, the performance data is played back, and the data for the 
performances on the upper manual and lower manual is recorded over 
again.
 
3.
 
Press the [Play/Stop] button when your recording is 
completed.
 
The [Rec] button and the [Play/Stop] button indicators will go dark.
NOTE
If you wish to re-record 
with different settings for 
voices, tempo, part balance, 
erase the recorded song (p. 
69) and re-record again. If 
the Control track still 
contains data from before 
you re-recorded, the 
volume or sounds may 
change during playback.
2, 3
1
You can re-record the pedal 
keyboard performance. For 
details refer to “Re-
recording the Pedalboard 
Performance” (p. 82).
NOTE
If you wish to keep the 
existing Expression Pedal 
data, and record only the 
panel operations, you can 
make settings to prevent 
the operation of the 
Expression Pedal from 
being recorded (p. 82). 
AT-15_e.book 68 ページ 2005年1月21日 金曜日 午後8時14分