Roland DP-900 Manuale Utente
33
Changing Various Settings
■
Applying the Damper Pedal to
the Left-hand Keyboard Area
the Left-hand Keyboard Area
When you are using Split play (p. 18), you can apply the
damper pedal effect to the sound played by the left-hand
keyboard range.
damper pedal effect to the sound played by the left-hand
keyboard range.
If you press
the [Organ] button
fig.disp-Off
Values
On
The damper pedal effect will be applied to the sound
of the left and right hand keyboard area.
of the left and right hand keyboard area.
OFF
The damper pedal effect will not be applied to the
sound of the left-hand keyboard area.
sound of the left-hand keyboard area.
Power-up default setting
OFF
Preventing the Settings from
Changing During Performance
■
Tone Lock
You can set the instrument so all of its buttons are disabled
(the settings in effect at that time will be maintained). This
prevents the settings from being inadvertently modified even
if children press the buttons accidentally.
(the settings in effect at that time will be maintained). This
prevents the settings from being inadvertently modified even
if children press the buttons accidentally.
1.
Hold down the [Brilliance] button and press the
[Key Touch] button.
The song or the metronome sound that is playing will
stop.
stop.
The following will appear in the display:
fig.disp—-
All buttons are disabled while the instrument is set like
this.
this.
To cancel the Tone Lock function, once again hold down
the [Brilliance] button while you press the [Key Touch]
button. Alternatively, you can lower the instrument’s
volume all the way and switch its power off. Then, turn it
on again.
the [Brilliance] button while you press the [Key Touch]
button. Alternatively, you can lower the instrument’s
volume all the way and switch its power off. Then, turn it
on again.
■
Disabling Everything Except
Piano Play (Panel Lock)
Piano Play (Panel Lock)
The “Panel Lock” function locks the DP-900 in a state where
only piano performance can be used, and all buttons will be
disabled. In the Panel Lock state, only the grand piano sound
can be played.
only piano performance can be used, and all buttons will be
disabled. In the Panel Lock state, only the grand piano sound
can be played.
1.
Turn the volume to the minimum, and press the
[Power] switch to turn off the power.
2.
Hold down the [Piano] button and press the
[Power] switch to turn on the power.
Then, continue to hold down these two buttons for a few
seconds.
seconds.
The following display will appear.
fig.disp—-
All buttons are disabled.
Adjust the volume.
When you play the keyboard, the grand piano sound will
be heard.
be heard.
To defeat the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.
to the minimum, and turn on the power once again.
DP-900_e.book 33 ページ ２００４年１１月２９日 月曜日 午後１２時５８分