Roland RP101 Manuale Utente

Pagina di 52
 
40
 
Connecting External Devices
 
 
Sending Recorded Performance 
Data to a MIDI Device (Composer 
Out)
 
When Composer Out is active, you can send performance 
data recorded with the RP101 to a connected MIDI device or 
computer.
 
When you turn on the power, this is set to “Off.”
 
1.
 
While holding down the [METRONOME] button and 
[REVERB/KEY TOUCH] button, press the F7 or F 7 
key to switch Composer Out on/off.
 
If Composer Out is turned on, the song data will be sent 
to a connected MIDI device or computer when you play 
back a recorded song.
 
Connecting to a Computer
 
You can use a USB MIDI interface cable (sold separately) to 
connect the RP101 to your computer.
You can connect the RP101 to a computer that has other 
sequencer software installed, and then play performances 
from the software through the RP101.
 
Connection Examples
NOTE
 
To prevent malfunction and/or damage to speakers or 
other devices, always turn down the volume, and turn off 
the power on all devices before making any connections.
NOTE
 
In order to make connections to your computer, you must 
install “MIDI driver” software on your computer. For 
details, refer to the owner’s manual for your MIDI 
interface.
Use a USB MIDI interface cable to connect the USB 
connector of your computer to the MIDI connectors of the 
RP101.
 
fig.comp.e
 
Key Pressed
Value
 
F7
 
Off
 
F
7
 
On
C8
F7
USB MIDI 
interface cable
Computer
MIDI IN
MIDI OUT
USB Connector
of your Computer
RP101
RP101_e.book 40 ページ 2007年4月4日 水曜日 午前11時50分