Roland V-Piano Manuale Utente

 

Detailed settings for various functions (Utility screen)

 

fig.UtilTone.eps

 

The parameters in this group are the same as the parameters that you can edit in the Tone screen.

 

This screen shows the name of the preset tone that was the basis of the customized tone.

* You cannot change the preset tone that was the basis of the customized tone.

 

fig.UtilToneEQ.eps

 

Each tone allows you to apply an equalizer to specific regions (“Zones”). This is called the Tone EQ. For each tone you can specify four 

Zones, and make different settings for each Zone.

 

fig.zone-1.eps

 

Of the four Zones, the settings of Zone 4 will take priority.

Each Zone has the following parameters.

 

Press the [F1 (ZONE)] button to switch between Zones.

 

Tone parameter settings (2. Tone Parameter)

 

Switch

OFF, ON

Turns this ZONE’s EQ on/off.

Gain

-12–+12 dB

Adjusts the gain.

Frequency

16–16000 Hz

Adjusts the center frequency.

Q

0.5, 1.0, 2.0, 4.0, 8.0

Adjusts the bandwidth. 
Higher values will narrow the frequency range.

Key Range

A0–C8

Sets the key range of this ZONE.

V-Piano_e.book 82 ページ ２００９年１月２８日　水曜日　午前９時１０分