Roland RP201 Manuale Utente

Pagina di 60
 
20
 
Before You Play
 
You can use headphones to enjoy the RP201 without disturbing 
those around you, such as at night. 
Since the RP201 has two headphone jacks, two people can also use 
headphones simultaneously. 
If you’re using only one set of headphones, you may connect them 
to either of the two headphone jacks.
 
fig.Headphones.eps
 
1.
 
Plug the headphones into the headphones jack located 
at the left of the RP201’s bottom panel.
 
If headphones are connected, no sound will be output from the 
RP201’s speakers.
 
2.
 
headphone volume.
 
Cautions when Using Headphones
 
• To prevent damage to the cord’s internal conductors, avoid rough 
handling. When using headphones, mainly try to handle either the 
plug or the headset.
• Your headphones may be damaged if the volume of a device is 
already turned up when you plug them in. Minimize the volume 
before you plug in the headphones.
• Excessive input will not only damage your hearing, but may also 
strain the headphones. Please enjoy music at an appropriate 
volume.
• Use headphones that have a stereo 1/4” phone plug.
Whenever you are not using the headphones, you can hang them 
on the headphone hook of the RP201.
 
Attaching the Headphone Hook
 
1.
 
Press and twist the headphone hook included with the 
RP201 into the hole in the bottom left of the RP201 (refer 
to the figure below).
 
2.
 
Turn the headphone hook wing nut to secure the 
headphone hook.
 
fig.Bottom-hook.eps
 
Do not hang anything other than headphones on the 
headphone hook. Doing so may damage the instrument or the 
hook.
 
Listening through Headphones
Headphones
 
Using the Headphone Hook
Headphone hook
Wing nut
RP-201_e.book 20 ページ 2009年11月20日 金曜日 午後2時3分