Roland FC-200 Manuale Utente
31
Sending the Data
(the sending FC-200)
1, 2
3
2
1.
Switch off the FC-200 that will be used to send the data.
2.
While keeping Number pedal “9” depressed, switch the power back on.
The indicator for the Control pedal flashes, and [
The indicator for the Control pedal flashes, and [
] (Bulk Dump) appears on the display.
3.
Press the Control pedal.
The indicator for the Control pedal stops flashing and remains lit continuously, the display readout
changes, and the data transmission (bulk dump) starts. When the transmission of data finishes, the
devices return to their normal state of operation.
The indicator for the Control pedal stops flashing and remains lit continuously, the display readout
changes, and the data transmission (bulk dump) starts. When the transmission of data finishes, the
devices return to their normal state of operation.