Yamaha 205M Manuale Utente

■ Clock

Determines whether the CVP-205/203 is controlled by its own internal clock or a MIDI clock signal received from 
an external device. “INTERNAL” is the normal Clock setting when the CVP-205/203 is being used alone. If you are 
using the CVP-205/203 with an external sequencer, MIDI computer, or other MIDI device, and you want the CVP-
205/203 to be synchronized to the external device, set this function to “EXTERNAL.” In the latter case, the external 
device must be connected to the CVP-205/203 MIDI IN terminal, and must be transmitting an appropriate MIDI 
clock signal.

■ Transmit Clock

Turns MIDI clock transmission on or off. When this is set to “OFF,” no MIDI clock or START/STOP data is 
transmitted.

■ Receive Transpose

When this parameter is set to “OFF,” note data received by the CVP-205/203 is not transposed, and when it is set to 
“ON,” the received note data is transposed according to the current CVP-205/203 keyboard transpose (page 133) setting.

■ Start/Stop

Determines whether incoming FA (start) and FC (stop) messages affect song or 
style playback.

SYS/EX. Tx (TRANSMIT)..................... Turns MIDI transmission of MIDI system 

exclusive message data ON or OFF.

SYS/EX. Rx (RECEIVE) ........................ Turns MIDI reception of MIDI exclusive data generated by external equipment 

ON or OFF.

CHORD SYS/EX. Tx (TRANSMIT) ...... Turns MIDI transmission of MIDI chord exclusive data (chord detect — root and 

type) ON or OFF.

CHORD SYS/EX. Rx (RECEIVE).......... Turns MIDI reception of MIDI chord exclusive data generated by external 

equipment ON or OFF.

* Available in RECEIVE display only (page 139).

Messages which are generated when the keyboard is played. Each message includes a specific note number 
which corresponds to the key which is pressed, plus a velocity value based on how hard the key is played.

Control change data includes pedal and any other controller data.

Program change data corresponds to voice or “patch” numbers.

With this function, the Clavinova senses how much pressure you apply to the keys while playing, and uses that 
pressure to affect the sound in various ways, depending on the selected voice. This allows you to play with greater 
expressiveness and add effects with your playing technique.

FA, FC 
MIDI messages for starting/stop-
ping the song or style. The “FA” 
message corresponds to start, 
and “FC” corresponds to stop.

Determines the 
channel for changing 
transmit settings.

Determines the Part for the 
selected channel.

Turns transmission of the 
specified data type on or 
off. See below for details 
on the data types.

The dots corresponding 
to each channel (1-16) 
flash briefly whenever 
any data is transmitted 
on the channel(s).

This determines which parts will 
send MIDI data and over which 
MIDI channel the data will be sent.