Roland LVS-800 Manuale Utente
19
Switching Between A Bus and B Bus
Changing the operation mode is accomplished using the menus. For more information about how to do this, refer to
“Changing Settings Using the Menus” (p. 36).
“Changing Settings Using the Menus” (p. 36).
*The on-screen menu will only appear on a monitor connected to the A/B MIX PVW jack.
1.
From the menu, select “Panel Mode Setup.”
Press the [MENU] button to display the menu screen. From the list that appears, choose “Panel Mode Setup,” then press
the [ENTER] button.
the [ENTER] button.
2.
Choose “PGM-PST Mode” or “LVS Mode.”
•PGM-PST mode This lets you use the [AUTO] button for A/B MIX to execute a transition after checking the preview video.
•LVS mode
•PGM-PST mode This lets you use the [AUTO] button for A/B MIX to execute a transition after checking the preview video.
•LVS mode
This lets you perform a transition directly using the input selector buttons.
3.
End the menu display.
Press the [MENU] button several times to make the menu display disappear.
The Names of the Buses in the PGM-PST Mode
When the operation mode is changed to the PGM-PST mode, the names of the buses also change. “A” becomes “PGM,”
and “B” becomes “PST.”
and “B” becomes “PST.”
Use in Other Operation Modes Besides the A/B Mode
Changing the Operation Mode