Euphonix EuCon Manuale Utente

18

8. Press and release the POWER switch on your MC Mix. 

Look at the top-right of your screen and wait up to 60 seconds. A green icon 

 in the menu bar indicates correct installation. 

If you did not see the green icon: 

• See My Surfaces on page 42 and add the MC Mix manually.
• Shut down the MC Mix and the Mac and repeat steps 7 and 8.
• If your Mac is pre-2002 and you are using an Ethernet router or switch, 

you need to purchase a normal straight-through Ethernet cable (instead 
of the crossover Ethernet cable supplied) from a computer store. 

• See 

shooting information

.

9. Launch your application and open a project (Logic, Cubase, Digital Performer, 

Pro Tools, etc.). 

10. To set up your application to work with the MC Mix, refer to the EuCon Ap-

plication Setup Guide that you downloaded at the beginning of this section.

Logic users do not need this document because additional setup is not 
required.

The MC Mix can control applications running on a second computer, referred to in 
this guide as a workstation. Most users will not need to do this because EuControl 
will be running on the same workstation as the their audio/video applications. 

Insert the installation CD into your Macintosh or, if you downloaded the latest 
software from the web, double-click on the installer. Follow the instructions to 
install the software.

Copy the latest software that you downloaded at the beginning of this chapter 
over to the second workstation. Double-click the Install EuCon Workstation installer 
in the Extras folder and follow the instructions to install the EuCon software.