Euphonix EuCon Manuale Utente

33

Each fader strip has one touch-sensitive, continuously rotating knob that adjusts 
parameters such as pan and aux send levels. The knob has a built-in switch 
allowing it to be pressed from the top. This is called the Knob Top key and is 
typically used to access sub-menus but also to turn parameters on/off. 

Figure 4-7 Knob controls

Each knob has the following controls:

•

The 

ON key toggles two-state parameters, such as EQ Band 1 on/off. 

•

The 

SEL key changes the knob function or toggles a secondary function’s 

value, such as an aux send pre/post fader. 

When the MC Mix is first powered on, the knobs are in normal mode (see Knob 
Modes on page 34). Each knob controls the left/right pan parameter for its track 
on the strip.

The knob selector keys can quickly access common parameters in normal mode:

•

Press

 AUX to assign each track’s first aux send to each knob. Press PAGE 

X

to assign the next aux send to the knob. Pressing 

W

 returns to the 

previous aux send.

•

Press 

PAN to assign the track’s left/right pan control to each knob. 

It is also possible to edit plug-ins, EQ, dynamics, and other functions on the 
knobs.