Euphonix EuCon Manuale Utente

36

INSERTS
Pressing the 

INSERTS key displays the inserts knob set for editing plug-ins. In 

normal mode, the first plug-in is displayed on the knob. Pressing one of these 
Knob Tops in normal mode toggles the MC Mix into channel mode and displays 
the first eight plug-in parameters for editing. Pressing a plug-in’s Knob Top 
displays its parameters for editing. 

EQ
Press the 

EQ key to display the EQ knob set to configure equalization controls 

and filters. This automatically toggles the MC into channel mode and shows four 
EQ bands on eight knobs. 

AUX
Press the 

AUX key to display the Aux knob set to control auxiliary sends. In normal 

mode, the first aux send is displayed. In normal mode, press the 

X

 key to 

advance to the second aux send. In channel mode, up to eight aux sends can be 
shown at once.

PAN
Press the 

PAN key to display the Pan knob set to configure left/right or surround 

panning. In normal mode, the left/right pan control is typically displayed. In 
channel mode, the first page of eight pan knobs is shown.

Press the

 key to display the Input knob set to configure input routing, mic 

gains, phantom power, and other application-specific parameters. 

Press the

 key to display the Dynamics knob set to configure compressors, 

limiters, expanders, and gates.

Press the

 key to display the Group knob set to configure group bus routing 

or control group (VCA) membership.

Press the

 key to display the Mix knob set to configure output routing.