Euphonix 5B Manuale Utente

System 5-B Digital Audio Mixing System Operation Manual

 

GPI/O Event System

143

Refer to Figure 11-1 and Figure 11-2 for these examples. The options available in the 
Input and Output Properties areas are summarized in Table 11-1 and Table 11-2.

If an event consists of just one input, AND and OR deliver the same result and may be 
used interchangeably. 

This example demonstrates how to turn off the floor monitors by moving any one of 
several faders above a selected level. 

1. In the Event Configuration window, under Event List, click on the <click to 

add event> field.

The Add Event dialog appears.

2. Select Or as the logical operator from the dropdown menu.

3. Under Input, click on the <click to add input> field.

The Add Input Event dialog appears.

4. Select Fader from the dropdown menu and click OK.

5. Configure the Input Properties to the following settings:

Channel #

1

Activation level (dB) -50

Activation Type Above

6. Repeat steps 3–5 for any additional channel faders and set the Channel # in 

step 5 to the new channel number.

7. Under Output, click on the <click to add output> field.

The Add Output Event dialog appears.

8. Select Control Room from the dropdown menu and click OK.

9. Configure the Output Properties to the following settings:

Action Monitor 

A

Off