Euphonix 5B Manuale Utente

System 5-B Digital Audio Mixing System Operation Manual

 

Channels and Strips

97

The Main and Swap channels are designated by a number (C# by default) or by a four-
character name assigned in the Channel Assign Panel (see page 92). The Main channel 
is below the Swap channel; the active channel’s display is brighter. Press the Swap key to 
switch between the Swap and Main channels. The Strip controls only the active channel.

The Routing, Input, Dynamics, EQ/Filters, Aux Sends, and Pan functions can be 
assigned to a Strip’s eight rotary knobs by the five switches below the knobs. If the 
function has more than eight parameters, the WX keys (above * key) page backward 
and forward to display the additional settings. Four function in/out switches are located 
to the left of the function selection switches.

Each Strip has eight illuminated, rotary knobs each with a four-character display and 
two switches. The knob is a continuous controller; as the knob turns, the LEDs on the 
outer ring light to show the current relative level. The display shows the knob’s current 
function except while adjusting the knob, when it shows the parameter’s value. 

The lower switch to the left of the knob toggles the knob’s function in/out.

Figure 8-6 Rotary Knob Controls

HiF

Select/Punch
for On/Off
switch

Knob Select/Punch
switch

Knob Automation
status LEDs

Switch Automation
status LEDs

On/Off
switch

Knobset
Select/Punch switch

Top of Strip