GE 131-10595-2 1-07 JR Manuale Utente
Select the proper position for the countertop
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1.)
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1.)
INSTALL THE RANGE
INSTALLING THE ANTI-TIP
BRACKET
BRACKET
The anti-tip bracket is attached to the back of
the Drop-In Range. It is designed to fit under
the bottom of the countertop opening at the
rear. Measure counter thickness at back of
cutout to determine correct bracket location.
the Drop-In Range. It is designed to fit under
the bottom of the countertop opening at the
rear. Measure counter thickness at back of
cutout to determine correct bracket location.
1
1 For 3/4” Counter
2 For 1.18” (3 cm) Counter
3 For 1.5” Counter
4 For 3.5”
5 Alternate
(shown below)
Anti-tip bracket location
(rear of range)
Cooktop
ANTI-TIP INSTALLATION
ALTERNATE
ANTI-TIP INSTALLATION
Interior wall
1/4” min. flat area
Wall stud
Countertop
thickness
thickness
Bottom of
countertop
countertop
Wire cover
Maintop
Anti-tip
bracket
bracket
Bottom of
countertop
to engage
bracket by
1/2” min.
countertop
to engage
bracket by
1/2” min.
Wall stud
10-3/8”
1-1/2”
Countertop
surface
surface
Interior wall
Wire
cover
cover
Attachment
anchored to
wall stud is
required
anchored to
wall stud is
required
Anti-tip bracket
Attachment
Non-kit application
Maintop
Position #5
non-kit
application
non-kit
application
*Attachment
to engage
bracket by 1/2” min.
bracket by 1/2” min.
9
Installation Instructions